All Models Carry the exact same FCC type acceptance there are no differences in design or specs of the chassis or electronics. Standard Accessories Included with Every Radio.
Upgraded models. Now complies with new FCC narrowband mandate. This radio is locked to narrowband in the commercial frequency range. It can be switched to wideband with software in the Amateur ham Range. If you use any other software to program this radio it will cause damage to the unit. If you use aftermarket software or software for one of the other Wouxun models it will damage the unit.
When using the correct software you can not use any other file that you may have saved from another application or from another wouxun model. You can only use files saved from this 1P software to program this radio. To enter Dealer Mode: see Section 4. Page Dtmf 5. Refer to the Wouxun manual if required. Page Software 10 Software Software programming of the Wouxun radios enables additional features not available through manual keypad strokes or menus.
These features may include: mode switch password, reset password, welcome message, priority scan channel, set scanned channels, DTMF options and frequency range unlocks. This manual is also suitable for: Kg-uv2d Kg-uv3d. Print page 1 Print document 17 pages. The 2D is as good if not better than wouxun kg-uv2d manual VX1R. The Wouxun is by far the best value I have found. I can see where I may want to get a better antenna for it but then Wouxun kg-uv2d manual always upgrade the antennas anyway.
The accessories are wouxun kg-uv2d manual reasonably priced and good quality. My Subscriptions Subscriptions Help. I have had excellent reports on my audio and the audio output is superb, better than the ones I paid times as much for. The USB driver is matching and installed successfully. The cable is connected well.
The software is matching. The com port is set correctly. Sometimes, the com port setting is the main problem. Please note that once the first 3 steps are done well, the com port will be selected automatically when you open the software. However, according to the different computer settings, the com port may be needed to re-set since the com port available for our software is com , and 3 com ports selectable at current operation.
If it happens to the situation above, please do the com port setting as followings: a. Go to the computer- property-device manager-port and check the USB-Serial com port. If the selected com port is out of the range, please go to the advanced option to re-select the matching com port.
Please note that the computer selected port should be compatible with the software port. If no, please change another connecting port for your computer. Please power on your transceiver and open your software, after that, do the reading from the radio programming.
Sometime, the connection is not stable at the first beginning, please spare more patience, try to power on your transceiver again and re-connect it. If the connection is still not OK, please try another cable or another transceiver to double check. Because sometime there maybe problems on the cable or the transceiver plug.
FileFile :drop-down menu options are as follow: NEW:Using this order can create new document, and make the present information resumed to the default value of programming software. SAVE :Using this order can save the present information to the computer for your future use.
OPEN:Using this order can open the saved information. EXIT:Using this order can exit from the programming and close the software. ProgrammingProgramming: the drop-down menu options are as follow: Read from Radio R : Once the option is selected, the read-out data includes Channel Message, Optional Function and Key set.
0コメント